|
|
|
Core technology |
Hot air generating facility |
Hot air generating facility(incinerator) can be used Food waste , PE, PP, RPF,F.O,VR as fuel and producing the 1100 ¡É of hot gas for drying This facility consist of primary secondary combustion chamber wastes as fuel storage hopper screw feeder for transfer of wastes asl fuel and blowers for combustion.
Such waste(as fuel) will be supplied to bottom of incinerator by the screw feeder and circled combustion air can be supplied to upper side of incinerator therefore combustion on the grate can be achieve the proper burning maintain desired certain temperature and perfect combustion. Also enough retention time can be maintained by the proper design of secondary combustion chamber size. Waste as Fuel : PE, PP, RPF,F.O,VR and wasted vinyl(PE) |
|
Eccentric Agitating type of dryer Carbonizing facility |
Dryer for sewage sludge consist of Rotating Drum attached lift, screw feeder and blades enable to crush the sludge and moving. located in inside of of Rotating Drum.
when sewage sludge feed in dryer by the screw feeder, sewage sludge can be raised and dropped the rotating multi-blade repeatedly and move to outlet. During the moving of sludge, Hot gas from Hot gas gerarating facility can be mixed and dried by the adjusting the RPM of Multi - blcdes in drum moisture and retention time of sludge can be controlled.
Drum can be operated under high temperature condition by the special design of bearing in outlet side of internal drum. Multi-blade moving velocity of sludse in drum can be possible |
Item |
Water evaporation |
Drum diameter |
Power |
Size of dryer
|
DSM - 300R |
250kg~350kg/HR |
¥õ1,100 |
12kw |
L5,200×W1,800×H2,300 |
DSM - 500R |
400kg~600kg/HR |
¥õ1,300 |
15kw |
L5,800×W2,000×H2,400 |
DSM - 750R |
650kg~850kg/HR |
¥õ1,540 |
18kw |
L6,000×W2,300×H2,700 |
DSM - 1000R |
600kg~1,100kg/HR |
¥õ1,600 |
20kw |
L7,000×W2,300×H2,700 |
DSM - 1300R |
1,200kg~1,400kg/HR |
¥õ1,740 |
21kw |
L8,500×W2,500×H3,200 |
DSM - 1600R |
1,500kg~1,700kg/HR |
¥õ1,900 |
24kw |
L9,100×W2,500×H3,500 |
DSM - 2000R |
1,800kg~2,200kg/HR |
¥õ1,900 |
30kw |
L9,600×W2,700×H3,500 |
DSM - 2500R |
2,300kg~2,700kg/HR |
¥õ2,200 |
35kw |
L10,500×W3,000×H3,700 |
DSM - 3000R |
2,700kg~3,200kg/HR |
¥õ2,300 |
37kw |
L11,000×W3,000×H4,000 |
DSM - 3500R |
3,200kg~3,700kg/HR |
¥õ2,500 |
40kw |
L11,500×W3,500×H4,300 |
DSM - 4000R |
3,700kg~4,300kg/HR |
¥õ2,500 |
43kw |
L12,800×W3,500×H4,500 |
|
|
|
Core technology |
Hot air generating facility / eccentric agitating type dryer / Carbonating facility internal section DWG of eccentric Agitating type dryer
|
|
Flow Sheet |
|
* back-pressure steam-turbine(6500kw/5000kw) / highback-pressure steam-turbine(700kw) |
|
* condensing steam-turbine(2500kw) / condensing steam-turbine generator(1000kw) |
|
|
Applied Technology |
Drying and carbonate system |
General |
After drying within 15% of moisture in the dryer transfer to carbonate facility for drying to 8% of moisture. Carbonated mat can be used for altemated compost and soil |
Process |
Transfer or sludge & Food waste - Storage hopper - Transfer sludge - Crushing and classifying - Feed to dryer - Tranfer dried mat 'l - Feed to carbonate facility - Storage carbonated mat 'l -Dish |
|
Drying and incineration |
General |
After drying around 15% of moisture feed to hot air generating facility(incinerator) for complete combustion |
Process |
Transfer of sludge&Food waste - Storage hopper -Transfer - Crushing and classifying - Feed to dryer - Transfer of dried mat 'l - Feed incinerator |
|
Drying and light weight aggregating system |
General |
Light weight granulizing mat 'l can be produced after drying the sludge and mixing with clay produced mat 'l can be utilityed to building mat 'l such as light weight Conc panel light weight brick and inter locking block for recycling |
Essential Technology |
Heat during combustion organic in sludge and energy of flue gas are utilized for granulizing system to produce the light weight aggregate. Also producted heat can be used for foaming agent |
Process |
Incoming sludge - Feed to dryer - Mixer - Forming - Sud drying - Granulizing furnace - Light weight aggregate - Discharge |
|
Drying and solidification system |
General |
Drying the sludge after mixing with agent and can be used cover mat 'l in land fill |
Process |
Incoming sludge - Feeding the solidiification agent - Mixer - Dryer - Solidiged - Deodorized and exhaust - Vanishment by - Produced cover mat 'l -Recycle |
|
Microzyme system |
General |
Develope recently in the world and talented vanish the organic malter by microzyme for food waste this process an can solved problem of landfill or incineration algo second contamination by leachate and or problem can be solved accordingly |
Process |
Incoming - Feeding(hopper) - Crushing and Classifying - Dehydrator - Storage - Transfer - Scattering - Agitating(Bio-chip) - Deodorization - Water Treatment - Compost and Produce RDF |
|
Electrical power |
- Back-pressure steam - turbines/Extraction-pressure steam-turbines
- Condensing steam - turbines(with/without non-automatic extraction)
- Extraction(single/double) - condensing steam - turbines
Induction - condensing steam - turbines |
Absorption chiller & Heater |
- Air-conditioning
- Heating |
|
|
|
Related Facilities |
|
|